Bearing Retainers
A high-strength, low-viscosity anaerobic retaining compound used for bonding cylindrical mechanical parts.
• Provides excellent vibration resistance
• Locks bearings in place and prevents movement
• Low viscosity enables filling of even the smallest gaps
Technical Specifications
| Bond Strength | High |
|---|---|
| Gap Filling | Up to 0.30 mm |
| Average Fixture Time | 10 minutes |
| Shelf Life | 24 months |
| Temperature Range | -50°C to +250°C (*For continuous exposure, maximum 230°C.) |
| Viscosity | 5000–10,000 cP |
| Specific Gravity | 1.12 |
| Packaging | Box | Carton | Pallet |
|---|---|---|---|
| 15 ml | 24 | 144 | 8,640 |
| 50 ml | 10 | 120 | 4,320 |
| 250 ml | 6 | 36 | 1,296 |
A very high-strength, medium-to-high viscosity anaerobic retaining compound used for bonding cylindrical mechanical components.
• Provides excellent vibration resistance
• Locks bearings securely and prevents any movement
• Used for bonding and securing shafts, gears, pulleys, and other cylindrical metal components
Features
- Can be used on all types of rigid surfaces.
- Strengthens metallic assemblies.
- Locks shaft projections and keys; compensates for wear in loose or worn fittings.
Application
- Before assembly, thoroughly clean male and female parts with an absorbent cloth to remove cutting oils.
- Apply the adhesive to the surfaces.
- Wipe off any excess product with an absorbent cloth.
- Assemble the parts and allow to cure for 24 hours at 22–24°C to achieve full strength.
- For disassembly, use hand tools to separate the bonded parts.
- If room-temperature disassembly is not possible, apply localized heating up to 250°C and disassemble while hot. Then mechanically remove any cured adhesive residue and clean the parts with a suitable solvent (e.g., acetone).
Technical Specifications
| Gap Filling | Up to 0.25 mm |
|---|---|
| Corrosion Properties | Non-corrosive |
| Flash Point | >93°C |
| Shelf Life | 24 Months |
| Temperature Range | -50°C to +150°C |
| Viscosity | 4000–5000 cPs (@20 rpm) |
| Specific Gravity | 1.04 |
Packaging Details
| Packaging | Box | Carton | Pallet |
|---|---|---|---|
| 15 ml | 24 | 144 | 8,640 |
| 50 ml | 10 | 120 | 4,320 |
| 250 ml | 6 | 36 | 1,296 |
A medium-strength, medium-viscosity anaerobic retaining compound used for bonding cylindrical mechanical components.
• Provides excellent vibration resistance
• Locks bearings in place and prevents movement
• Ideal for parts that require periodic disassembly during maintenance
Technical Specifications
| Main Ingredient | Methacrylate monomers |
|---|---|
| Bond Strength | Medium |
| Gap Filling | Up to 0.15 mm |
| Average Fixture Time | 20 minutes |
| Temperature Range | -50°C to +150°C |
| Viscosity | 500–1000 cP |
| Specific Gravity | 1.0 |
Packaging Details
| Packaging | Box | Carton | Pallet |
|---|---|---|---|
| 15 ml | 24 | 144 | 8,640 |
| 50 ml | 10 | 120 | 4,320 |
| 250 ml | 6 | 36 | 1,296 |
A high-strength, medium-viscosity anaerobic retaining compound designed for bonding cylindrical mechanical parts, offering temperature resistance up to 250°C.
• Provides excellent vibration resistance
• Locks bearings securely and prevents any movement
• Specially formulated for high-temperature applications
Technical Specifications
| Bond Strength | High |
|---|---|
| Gap Filling | Up to 0.30 mm |
| Average Fixture Time | 10 minutes |
| Temperature Range | -50°C to +250°C (*For continuous exposure, maximum 230°C.) |
| Viscosity | 5000–10,000 cP |
| Specific Gravity | 1.12 |
Packaging Details
| Packaging | Box | Carton | Pallet |
|---|---|---|---|
| 15 ml | 24 | 144 | 8,640 |
| 50 ml | 10 | 120 | 4,320 |
| 250 ml | 6 | 36 | 1,296 |