Epoxies
A high-strength, non-shrinking epoxy adhesive designed for bonding and insulation applications.
It features a crystal-clear appearance and offers excellent resistance to impact and water.
It is used for both bonding and insulating electronic components and assembly operations.
Additionally, it is ideal for bonding ferrite, wood, and concrete surfaces, as well as for use in gift item assembly.
Features
- Suitable for bonding acrylic, ceramic, fiberglass, glass, porcelain, metal, wood, and concrete surfaces.
- Tensile Strength: 2500 psi (175 kg/cm²)
- Color: Transparent
- Waterproof formulation
- Working Time: 30 minutes
- Set Time: 30 minutes
- Cure Time: 8–12 hours
- Temperature Range: -5°C to +95°C
Application Recommendations
Mix only the amount of product that can be used within the working time.
Damaged enamel and porcelain surfaces can be repaired by mixing colored plaster powder with the epoxy.
Color pigment concentrates may also be added if desired. This step must be done after thoroughly
mixing the resin and hardener.
To protect surfaces from unwanted epoxy adhesion, you may apply removable tape.
However, it is recommended to remove the tape before the epoxy fully cures.
A two-component, fast-curing, transparent, general-purpose epoxy.
It provides better results on hard and smooth surfaces.
It can be used for repairs in automobiles, bicycles, boats, and many similar applications.
It may also be used as a metal filler or to replace deteriorated wooden surfaces.
Apply the mixed epoxy directly onto the repair area.
The Flow-Mix nozzle automatically mixes the resin and hardener.
The package includes two self-mixing Flow-Mix applicator tips.
Features
- Bonds metal, wood, glass, ceramic, concrete, stone, porcelain, and fiberglass surfaces.
- Tensile Strength: 1500 psi (105 kg/cm²)
- Color: Transparent
- Waterproof
- Working Time: 5 minutes
- Set Time: 8–10 minutes
- Cure Time: 1 hour
- Temperature Range: -5°C to +95°C
Application Recommendations
To prevent air bubbles from entering the Flow-Mix applicator, pull the plunger back slowly
by approximately 0.7 cm.
Push the plunger downward steadily and evenly to dispense equal amounts of resin and hardener.
Note: For proper curing, the resin and hardener must be thoroughly mixed.
If both applicator tips have been used and epoxy remains in the cartridge, the material can be mixed manually
before application.
A two-part epoxy putty formulated in a concentric stick form.
It provides permanent leak repair on metal, fiberglass, concrete, and ceramic surfaces.
It can be used to fill holes and seal cracks.
The putty is designed for hand-kneading and offers a practical stick format.
It adheres to wet surfaces, can be applied underwater, cures quickly, and can be sanded once hardened.
After full curing, it can be painted.
Recommended Applications:
Ideal for repairing cracks and broken areas on tanks and drums, fixing plumbing and pipe systems,
repairing machinery and equipment, areas that come into contact with drinking water,
and performing underwater repairs.
Waterproof. Suitable for use in both saltwater and freshwater.
Features
- Bonds metal, concrete, wood, ceramic, fiberglass, hard plastic, and PVC surfaces.
- Tensile Strength: 1500 psi (105 kg/cm²)
- Color: Off-White
- Waterproof
- Working Time: 2–3 minutes
- Set Time: 3–4 minutes
- Full Cure: 24 hours
- Temperature Resistance: 93°C (dry), 51°C (wet)
Application Instructions
Cut, knead, apply!
Cut the required amount and knead until a uniform color is achieved, then apply to the area being repaired.
Shape the putty as needed and press firmly onto the desired surface.
Mix only the amount that can be used within the working time.
Once fully cured, the material can be sanded, drilled, machined, tapped, and painted.
A high-strength, two-component cold-weld epoxy that can be drilled, tapped, machined, and used as a filler once fully cured.
It fills gaps, repairs cracks, and contains a non-rusting steel alloy.
Suitable for use on all types of metal surfaces.
Ideal for repairing broken furniture, tools, appliances, toys, automobiles, and many other items.
It is non-flammable, corrosion-resistant, and completely waterproof.
Features
- Bonds steel, stainless steel, aluminum, brass, iron, tin, and copper surfaces.
- Tensile Strength: 2500 psi (175 kg/cm²)
- Color: Dark Gray
- Working Time: 60 minutes
- Set Time: 6 hours
- Full Cure: 16–24 hours
- Temperature Resistance: 93°C continuous, 121°C intermittent
Application Recommendations
Mix only the amount of resin and hardener that can be used within the working time.
For proper curing, the resin and hardener must be thoroughly blended until completely uniform.
It is not recommended to expose epoxies to chemicals or solvents for prolonged periods.
Not suitable for use on polyethylene or polypropylene surfaces.
A structural epoxy adhesive with excellent gap-filling capability.
It is ideal for bonding different types of surfaces such as metals, ceramics, wood, and more.
It is resistant to environmental conditions, high humidity, and temperature variations.
Requires minimal surface preparation. Once cured, the adhesive can be drilled, sanded, and painted.
Suitable as a hard plastic adhesive for PVC, acrylic, ceramic, concrete, fiberglass, metal, wood, and vinyl surfaces.
Features
- Bonds hard plastic, styrene, PVC, acrylic, ceramic, concrete, fiberglass, metal, wood, and vinyl.
- Tensile Strength: 3500 psi (245 kg/cm²)
- Waterproof
- Color: Cream
- Working Time: 4–5 minutes
- Set Time: 10–15 minutes
- Cure Time: 24 hours
- Temperature Range: -5°C to +95°C
Application Recommendations
Do not freeze. Store between 13°C and 24°C.
For proper curing, equal amounts of adhesive and activator must be thoroughly mixed until fully homogeneous.
Mix only the amount that can be used within the working time.
Not recommended for polyethylene or polypropylene surfaces.
Avoid using on copper or brass surfaces.
A flexible, permanent rubber-bonding, industrial-grade single-component adhesive.
It is designed for applications requiring durable elastic adhesion.
Bonds rubber, canvas, tarpaulin, wood, metal, and certain types of plastics.
It is resistant to ultraviolet light, weather conditions, oils, acids, and alkalis.
Provides repair, filling, and insulation functions, and ensures waterproof bonding.
Used for bonding rubber to metal, rubber to rubber, attaching tire patches,
bonding rubber to plastic, and repairing inflatable zodiac boats.
Features
- Resistant to UV light, weather conditions, oils, acids, and alkalis.