Threadlockers

A low-strength threadlocker that allows easy disassembly. Suitable for all metal threads.

Technical Data

Pack Contents

A general-purpose, removable thread-locking and bolt-retaining product. – Resists vibration – Disassembled parts can be reused Features and Applications Can be used on all bolt and nut sizes. Its special formulation does not drip or run after application. Resistant to leaks, corrosion, many chemicals, fuels, oils and gases. Application

1. 1. Before assembling the male and female parts, wipe them with an absorbent cloth or tissue to remove all cutting oil.

Apply the adhesive 360 degrees around the first 3 threads of the male and female parts.

1. Wipe off excess product in the direction of the threads with an absorbent cloth or tissue.
2. Assemble the parts and leave them for 24 hours at 22–24°C to ensure full cure.
3. To disassemble, use hand tools to separate the bonded parts.
4. If disassembly at room temperature is not possible, apply localised heat up to 150°C and disassemble while hot. Then remove any remaining cured adhesive mechanically and clean the parts with a suitable solvent (e.g. acetone).

Technical Data

Pack Contents

A general-purpose, permanent thread-locking and bolt-retaining product. – Resists vibration. – Parts that are disassembled can be reused. Technical Data

Pack Contents

A high-strength, medium-viscosity thread-locking and bolt-retaining product that is difficult to disassemble and withstands temperatures up to 230°C. – Resists vibration. – Formulated for high temperatures. – No need to remove surface oils before application. Pack Contents