Retaining Compounds

A high-strength, low-viscosity anaerobic retaining compound for joining cylindrical mechanical parts. – Resists vibration. – Secures bearings and prevents movement. – Its low viscosity fills the smallest gaps. Technical Data

Pack Contents

A very high-strength, medium-to-high viscosity anaerobic retaining compound for joining cylindrical mechanical parts. – Resists vibration. – Secures bearings and prevents movement. – Used to bond and secure shafts, gears, pulleys and other cylindrical metal parts. Features

• Can be used on all types of hard surfaces.
• Used to strengthen metallic joints.
• Locks keys to shaft shoulders and takes up play in worn joints.

Application

1. Before assembling the male and female parts, wipe them with an absorbent cloth or tissue to remove all cutting oil.
2. Apply the adhesive to the surfaces.
3. Wipe off excess product with an absorbent cloth or tissue.
4. Assemble the parts and leave them for 24 hours at 22–24°C to ensure full cure.
5. To disassemble, use hand tools to separate the bonded parts.
6. If disassembly at room temperature is not possible, apply localised heat up to 250°C and disassemble while hot. Then remove any remaining cured adhesive mechanically and clean the parts with a suitable solvent (e.g. acetone).

Technical Data

Pack Contents

A medium-strength, medium-viscosity anaerobic retaining compound for joining cylindrical mechanical parts.

– Resists vibration.

– Secures bearings and prevents movement.

– Ideal for parts that need to be removed during maintenance.

Technical Data

Pack Contents

A high-strength, medium-viscosity anaerobic retaining compound for joining cylindrical mechanical parts, with temperature resistance up to 250°C. – Resists vibration. – Secures bearings and prevents movement. – Formulated for high temperatures. Technical Data

Pack Contents